Brick calculator
Choose a wall or a patio and enter its size. You'll get the number of bricks, and for a wall, the bags of mortar to lay them.
- Bricks per sq ft
- –
- Area (sq ft)
- –
- Mortar, 80 lb bags
- –
Mortar assumes about 40 bricks per 80 lb bag. Single thickness wall.
How the math works
Each brick covers its face plus one mortar joint. A modular brick with a 3/8 inch joint covers 8 by 2⅝ inches, so about 6.9 bricks fill one square foot of wall. A 20 foot wall, 4 feet high, takes about 550 bricks, or 576 with 5% extra, and around 15 bags of mortar.
Paving bricks are set tight in sand with no mortar. A 4 by 8 inch paver covers 32 square inches, so it takes 4.5 per square foot.
Common questions
Is this for a single or double wall?
The numbers are for a single layer of brick, one brick thick. A double-thickness wall needs twice the bricks and mortar. Freestanding walls over about 3 feet usually need a double wall or reinforcement, plus a solid footing.
Are paving bricks the same as wall bricks?
No. Paving bricks are made denser to handle foot traffic, freezing and thawing. Using ordinary wall bricks flat on the ground often leads to cracking and flaking.
How much extra should I buy?
Five percent is enough for a simple wall. Add 10% for patterns like herringbone, many corners or cuts, or if you might need matching bricks for repairs later.
More yard calculators
- Paver calculatorPavers, base gravel and bedding sand for a patio or walkway.
- Retaining wall block calculatorBlocks, caps and drainage gravel for a garden retaining wall.
- Fence calculatorPosts, rails, pickets and concrete for a wood fence.
- Concrete calculatorCubic yards and bags of concrete for slabs, pads and footings.
- Deck board calculatorDeck boards, linear feet and screws for a new deck surface.
- Landscape edging calculatorFeet of edging, pieces and stakes to outline a bed.